Honchkrow Instructions

Build the top of the hat, leaving the back 'streamers' uncut until the bottom is attached. 
Build the head from the beak out, and attach the bottom of the hat to the completed head. 
Then attach the top of the hat and bottom of the hat together, and then trim and shape the back of the hat. 

Build the white fur of the chest, and then work down. Attach the head at any time. 
Attach the saluting wing to the body as soon as possible (as indicated by the numbers), but leave the folded wing 
unattached for now, but built. Build the legs (the parts that attach to the body directly), attaching the bottom ring 
of the body to them. Start to wrap it around the body, beginning to close it, but leave a small opening in order to push 
from the inside of the body when attaching the folded wing. 
BEFORE CONTINUING ANY FARTHER BE SURE TO ATTACH SOME WEIGHT TO THE REAR OF THE BODY. With one of each wing, it does not stand without weight. 
If the weight is put into the tail, the joint between the tail and body is weakened. 
After the second wing is attached, close the body. 

Build the black parts of the legs from the claws upward, and attach them to the body when complete. Be sure the connection is firm
and that they will hold the weight of its body. 

Now build the tail, being very careful and referring to the pdo as much as possible. The tail is tricky due to all the spikes, but as long as 
you attach the spikes to the right spots, it works out alright. Once all of the spikes are attached, attach the white 
ring to it. The end of the white ring that has the blue feathers is what will be used to attach it to the body. 

Take the open end of the tail and attach it to the similarly feathered end of the body. Trim the feathers as you like. 

