Flygon papercraft:

Follow the numbers on the template while building the model.
Hands are really tiny, so use tweezers to keep tabs still while gluing them, and use the pdo as reference (without it, hands are really complicated).
You'll need to glue a weight inside the belly, in order to counterbalance the wings/tail. A too heavy weight will make the feet bend, so
try different objects before gluing (I used a pebble).
To attach the wings, cut a slit on the back of the models (one for each wing). Look at the pdo to locate the spot more accurately. Then make the two
tabs of the wing slide inside the cut, and glue them inside the model. If the wing is too heavy and tends to fall, you can cut out two strip of thick
paper as wide as the wing tab, glue them back to back,and glue them inside two wing parts (see the "wing inside scheme" sketch to understand how).
This way youll'have a "bone" for the wing and longer tabs to glue inside the model.
Also note that the green eye and red eye are interchangable, either can be used for building.
The green eye is there to allow for anyone that would like to try transparencies
over the eye to get a more 'realistic' effect.